Frequently asked questions
How is the NuCanoe MAX Port connector delivered?+
What warranty comes with the NuCanoe MAX Port connector?+
Is the NuCanoe MAX Port connector compatible with my kayak?+
Can I return the NuCanoe MAX Port connector?+
NuCanoe MAX Port connector
€24.99
The NuCanoe MAX Port connector is for routing cables through the kayak hull or a cover plate. A rubber grommet seals tightly around the cables.
✔ Sealed connector: the rubber grommet keeps water from getting through the opening
✔ Two-part design: a nylon plate and a rubber grommet
✔ Two connectors included: route cables in two places
✔ Everything for installation: screws and a drill bit for pilot holes included
NuCanoe MAX Port connector is for routing fish finder, motor or other electronics cables through the kayak hull. It can also be fitted to the HD Access Plate or Wiring Access Plate cover. Fits NuCanoe UNLIMITED MAX, UNLIMITED, U10, F10, Frontier 12 and Pursuit kayaks.

Main benefits of the MAX Port
✓ Watertight seal – the rubber grommet fits tightly around the cables and keeps water out
✓ Tidy installation – cables run through the hull, not over the deck or the side
✓ Two connectors – the set includes two plates with grommets
✓ Everything for installation – 8 screws and a drill bit for pilot holes
✓ Several mounting locations – fits the hull and NuCanoe cover plates
Design and installation

Two part construction
The connector consists of a nylon plate and a rubber grommet. The cable passes through the grommet, which seals tightly around it. This way the opening stays sealed even with the cable routed through.

Installation
The plate is fastened with screws. A 3.2 mm (1/8 inch) drill bit is included for drilling the pilot holes. Before drilling, choose a spot where the cable will be protected and out of the way.
HD Wire Kit
The MAX Port connector is also part of the NuCanoe HD Wire Kit. If you already have this kit, you don't need to buy the connector separately.
The connector is mounted in the kayak, HD inspection hole cover or cable entry plate. Unlimited MAX The kayak comes with two MAX Port connectors as standard. It is convenient to route the cables from the battery out of GearPod or battery boxes.
Technical data
Material: nylon, rubber
Mounting location: kayak hull, HD Access Plate, Wiring Access Plate
Weight (manufacturer data): 0.45 kg
Compatibility: NuCanoe UNLIMITED MAX, UNLIMITED, U10, F10, Frontier 12, Pursuit
What's included:
- 2 MAX Port plates with grommets
- 8 mounting screws
- 3.2 mm (1/8 inch) drill bit
Who is the MAX Port for?
✓ Those installing a fish finder and routing the transducer cable through the hull
✓ Those connecting motor or battery cables
✓ Those who want a tidy installation with no cables on the deck
✓ NuCanoe owners routing cables through the HD Access Plate or Wiring Access Plate cover
Additional information
| Weight | 0.45 kg |
|---|---|
| Type | Accessory |
| Use | Cable routing |
| Model | 4245 |
Additional information
| Weight | 0.45 kg |
|---|---|
| Type | Accessory |
| Use | Cable routing |
| Model | 4245 |










Reviews
There are no reviews yet.