Native Watercraft Hammer 1210

Native Watercraft Hammer 1210: your fishing command centre

A kayak built to handle both pedal and motor propulsion without compromise. The Hammer 1210 is for tactical anglers who need clean transitions between propulsion systems, an open deck and unbeatable flexibility, whether you fish with a bow motor, a stern motor or a combination of both. This is your new fishing command centre.

Key features ✓ Dual propulsion without compromise– the only kayak designed from the ground up for both a pedal and a motor system, without sacrificing one for the other ✓ Propel X-Range pedal system (patent pending)– folds up onto the front deck, one-handed deployment, self-aligning latch, integrated weed cutter ✓ PowerLink™ electronics platform– 2 dedicated battery compartments, cable pass-through holes at the front, middle and rear, support for Group 31 / LoPro lithium batteries ✓ Bow and stern motor mounting– the bow with a foot steering system and spot-lock precision, the stern with a balanced design; both are supported at the same time ✓ A hull built for the mission– a sharp bow entry and clean stern exit for speed, a 91.4 cm beam for a stable standing platform, and reserve buoyancy chambers above the waterline ✓ Full-length accessory tracks– from bow to stern, letting you mount any gear anywhere ✓ PivotPro seat– a raised, stable control platform with breathable comfort and side gear pockets ✓ 27-feature fishing centre– a bow motor mount, PowerLink plates, battery hatches, accessory mounts, side grab handles, a stern motor base and much more ✓ Sealed dry well– integrated into the drive system cover, protecting valuables from moisture ✓ Sidekick Wheel System ready– easy transport to the water and back ✓ Made in the USA– Native Watercraft quality, proven by US manufacturing standards

Propel X-Range pedal system (patent pending)

The revolutionary Propel X-Range system redefines pedal kayak ergonomics. It folds straight onto the front deck, freeing up as much cockpit space as possible, so you don't need to remove the system to fish. A one-handed twist-and-lock deployment lets you switch from pedals to motor in seconds. The integrated weed cutter keeps things running smoothly even in dense vegetation. The self-aligning latch system and quick-release crossbar strap make transport easier, as the system comes off and goes back on quickly.

PowerLink™ electronics integration

The Hammer 1210 has industry-leading battery capacity: two separate compartments with PowerLink™ connectors supporting Group 31 or LoPro lithium batteries. Cable pass-through holes in the hull at the front, middle and rear let you route cables cleanly even for the most complex electronics projects: FFS transducers, NMEA networks, fish finders and more. PowerLink™ plates are placed throughout the kayak, so you plug electronics in where you need them, without extra cable clutter.

Hull design built for the mission

The Hammer 1210 hull is designed around one principle: speed, stability and dry working conditions without compromise. A sharp bow entry and clean stern exit give excellent glide through the water. The 91.4 cm wide deck creates a reliable standing platform: you can stand up, throw the line or operate the electronics. Reserve buoyancy chambers above the waterline keep it balanced even with a fully loaded stern motor base and full batteries.

27-feature fishing command centre Every centimetre of the Hammer 1210 is designed with a purpose. The 27-feature layout includes: ✓ Bow motor mount with a foot steering system ✓ PowerLink plates at the front, middle and rear ✓ Front battery storage hatch ✓ Captain's Bridge accessory base ✓ Propel X-Range pedal system ✓ Sealed dry well in the drive system cover ✓ Yak Attack cable pass-through fittings ✓ Groove Track rails along the whole kayak ✓ Large deck pad area ✓ Side gear pocket slots ✓ Front rod holder ✓ Spring Blade rudder handle ✓ PivotPro seat with a gear pocket ✓ Wizard foot steering ready ✓ Large battery compartment ✓ Sidekick Wheel System ready ✓ Flush mount rod holders ✓ Stern motor base with trim balance ✓ Hull access hatch ✓ Skid plates

Modular motor control

The Hammer 1210 offers unmatched flexibility in motor configuration. You can mount a bow motor with a foot steering system and spot-lock precision, ideal for rivers and currents. A stern motor with a trim-balanced design keeps the kayak level even with heavy power at the back. Or use both at once: the Hammer 1210 is designed to keep both systems running together without balance problems.

Ready to rig and mount

Full-length Groove Track rails from bow to stern let you mount accessories anywhere. Recessed gear fittings in the tank well and side gear pocket slots keep the deck tidy. The PivotPro seat gives a raised control platform with breathable comfort and an integrated side gear pocket. The system is designed for professional tournament fishing setups, for beginners and experienced tournament anglers alike.

Who is it for?

The Native Watercraft Hammer 1210 is made for:

✓ Tactical anglers– who need a quick transition between pedal and motor systems
✓ Tournament anglers– for complex electronics installations: FFS, NMEA, fish finders
✓ River and lake anglers– who fish both slow and fast water
✓ Anglers who love electronics– maximum battery and cable management
✓ Those who want no compromises– the best pedal kayak and motor kayak in one

Colours

Gator Green

Grey Goose

Hidden Oak

Wavestrike

The Native Watercraft Hammer 1210 is not just a kayak. It's a whole new tactical fishing experience that lets you be everywhere at once: pedal and motor, bow and stern, on deck and in the water. Take a look and try it for yourself.