Accessories for this kayak
Accessories mount on the kayak's tracks, no drilling needed.
Frequently asked questions
How is the Native Watercraft Hammer 1210 delivered?+
What warranty comes with the Native Watercraft Hammer 1210?+
What are the dimensions and weight of the Native Watercraft Hammer 1210?+
Is the Native Watercraft Hammer 1210 suitable for beginners?+
Can you fish with the Native Watercraft Hammer 1210?+
Can I return the Native Watercraft Hammer 1210?+
Native Watercraft Hammer 1210
Original price was: €5,999.00.€5,499.00Current price is: €5,499.00.
The Native Watercraft Hammer 1210 is a pedal fishing kayak designed to be propelled by both pedals and a motor.
✔ Propel X-Range pedal drive – folds on the front deck, unfolds with one hand
✔ Two battery compartments and PowerLink boards – tidy wiring for complex electronics
✔ Front and rear engine mounts – single engine or dual
✔ 91.4 cm width – a solid platform for standing
✔ Groove Track rails around the entire kayak - attach accessories where you need them
Native Watercraft Hammer 1210 is a pedal fishing kayak designed from the ground up for both pedals and motoring. The new Propel X-Range drive folds up on the front deck, so it doesn't get in the way when motoring. When needed, it unfolds in seconds. The manufacturer Hammer calls it the fishing command center.

Key benefits of Hammer 1210
✓ Pedals and motor in one housing – both systems work together, not at the expense of each other
✓ Propel X-Range drive – folds and unfolds with one hand
✓ Grass cutter in gear – easier to swim through aquatic vegetation
✓ Two battery compartments – in front and under the seat, fits Group 31 or Newport LoPro under the seat
✓ PowerLink board and wiring holes in the housing – front, middle and back
✓ Engine mounts front and rear – one engine or two
✓ PivotPro seat – tall, quiet, with bait tray
✓ Sealed compartment in the gear cover – for small items you don't want to get wet
Construction and details
Propel X-Range drive
The gear rotates and stows on the foredeck, freeing up more space in the cockpit. You unfold it with one hand and the lock centers itself. If the battery runs out or the motor propeller breaks, you lower the gear and keep fishing. The crossbar can be quickly removed for travel.
Electronics and batteries
The Hammer has two battery compartments: one in the front and one under the seat. The under-seat compartment accommodates a Group 31 or Newport LoPro lithium battery. PowerLink boards are installed at all key mounting points, and wiring is routed through holes in the hull. Suitable for both FFS transducers and NMEA networks.
Hull
The sharp front and clean rear help the kayak sail quickly and efficiently. The 91.4 cm width provides a solid platform for standing casting. There are additional buoyancy chambers above the waterline, so the kayak remains level when loaded with gear or a motor at the rear.
Motors
The front motor is equipped with foot-operated steering and a neat wiring path, and a spot-lock motor is suitable. The rear motor has a reinforced rear storage and a balance housing. It is also possible to use two motors at the same time.
Equipment mounting
Groove Track rails run the entire length of the kayak, and the rear storage area has recessed rails for a box. There is space on the sides for bait trays and the option to attach a Captain's Bridge. The kayak has a SpringBlade rudder, is ready for Wizard foot steering, and Sidekick wheels.
What does 294.8 kg lifting capacity mean?
The manufacturer states that the Hammer 1210 has a maximum load capacity of 294.8 kg. The kayak with the drive and seat weighs 63.5 kg. For example, a 90 kg angler and 50 kg of equipment makes up 140 kg. A 100 kg angler with an engine, two batteries and equipment, a total of 80 kg, makes up 180 kg. Both cases are well below the limit. The manufacturer does not publish an optimal load range.
Technical data
Length: 391 cm
Width: 91.4 cm
Depth (height): 34.3 cm
Body weight: 49.9 kg
Weight with gear and seat: 63.5 kg
Lifting capacity: 294.8 kg
Drivetrain: Propel X-Range pedal drive, front and rear motor ready
Rudder: SpringBlade
Material: polyethylene
Made in: USA
Hammer 1210 video review
Who is the Hammer 1210 suitable for?
✓ For fishermen who want to combine motor and pedals
✓ For fishermen with a lot of electronics: FFS transducers, multiple displays, NMEA
✓ For fishermen on large lakes and rivers where you need to reach a location quickly
✓ For those who carry heavy batteries and a lot of equipment
If pedals are the most important thing and the engine is only used occasionally, check it out Native Watercraft Slayer Propel MAX 12.5: its body weighs 43 kg, Hammer 49.9 kg. For those looking for an even wider platform for parking, it is worth taking a look Native Watercraft TitanX Propel 12.5, with a width of 101.6 cm.
The Hammer 1210 is a kayak for the fisherman who wants to go fast with the motor and quiet with the pedals, without having to rearrange the equipment.
Additional information
| Weight | 49.9 kg |
|---|---|
| Colour | |
| Country of origin | USA |
| Maximum load capacity (kg) | 295 |
| Material | Polyethylene |
| Use | Fishing |
| Product group | Kayaks |
| Motor-ready | Yes |
| Type | Fishing kayak |
| Length | 391 cm |
| Width | 91.4cm |
| Height | 34.3 cm |
| Propulsion | Pedal (Propel X-Range) |
| Number of seats | 1 |
Additional information
| Weight | 49.9 kg |
|---|---|
| Colour | |
| Country of origin | USA |
| Maximum load capacity (kg) | 295 |
| Material | Polyethylene |
| Use | Fishing |
| Product group | Kayaks |
| Motor-ready | Yes |
| Type | Fishing kayak |
| Length | 391 cm |
| Width | 91.4cm |
| Height | 34.3 cm |
| Propulsion | Pedal (Propel X-Range) |
| Number of seats | 1 |






















Reviews
There are no reviews yet.