YakAttack daviklio svirtis SwitchBlade (65 cm)

YakAttack SwitchBlade is a fish finder transducer deployment arm with a 65.4 cm overall length. The blade is hydrodynamically designed, so fewer air bubbles form around the transducer and the fish finder picture stays readable even when you paddle faster. The arm mounts on a track, directly on the deck or on a YakAttack CellBlok plate.

Key features

✓ Hydrodynamic blade - less turbulence and noise at the transducer

✓ 65.4 cm overall length deep enough for a side scan transducer

✓ Folding construction - the transducer lifts out of the water without taking the mount apart

✓ Multi-pivot mechanism - easy to lower and raise with one hand

✓ Three mounting methods - a track, the deck or a CellBlok plate

✓ Adjustable length - the middle section can be cut to suit the kayak

✓ Compatible with LockNLoad - with a LockNLoad base fitted instead of the knob, the fish finder and transducer stay in one system

✓ Marine-grade materials - made for use in salt water

A blade that reduces bubbles
The main problem with a transducer mount is air bubbles that pass under the transducer and spoil the picture on the screen. The SwitchBlade blade is shaped so that the water flow passes around it smoothly. The practical result is simple: the fish finder shows the bottom when you paddle at a normal pace, not only when stationary.

Track mounting
The base fits on YakAttack MightyMount, GearTrac and most factory kayak tracks. In place of the standard knob you can screw in a LockNLoad base, and then the fish finder screen and the transducer arm form one compact unit on the same track.

Pivots and depth adjustment
The tubular construction with several pivots lets you lower and raise the transducer with one hand, without undoing any bolts. If you don't need the full length, the middle section can be removed or cut to the side of your kayak.

Mounting on a CellBlok
The same mount screws onto the YakAttack CellBlok plate, which holds a fish finder battery. This way the screen, the power and the transducer stay in one unit that you can take off the kayak in one motion after paddling.

Who is the SwitchBlade daviklio nuleidimo svirtis for?

We recommend it if:

✓ You use a fish finder on a kayak and want a clean picture, not only when stationary

✓ You need side scan depth, which a transducer glued inside the hull doesn't give

✓ You often change kayaks or transport them, so the mount needs to come off quickly

✓ You already have YakAttack tracks or a CellBlok plate

The SwitchBlade solves a specific problem: a transducer mount that doesn't get in the way of paddling and doesn't need to be taken apart all the time. The fish finder, transducer, track and LockNLoad base are not included.